Manual

T10 PRO SMART THERMOSTAT WITH REDLINK
17 33-00462—01
Table 5. Installer Setup (ISU)
ISU #
Installer Setup
Name Settings Default Notes
None Language • English
• Francais
• Espanol
Engligh
None Room • Bedroom
• Living space
• Other
No defaulted
value
In what type of room will this thermostat be
installed?
These questions are asked for two reasons:
1. Other RedLINK indoor sensors could
be used for other spaces in the home.
When these sensors are used, the cus-
tomer is able to select certain sensors
to have priority under certain condi-
tions (active rooms based on motion
detection, selected rooms based on
schedule settings).
2. There may be multiple thermostats in
the same location controlled via the
app.
None Room Bedroom:
• Guest Bedroom
• Master Bedroom
• Add room
Living Space:
• Family room
• Living Room
• Rec Room
• Add room
Other:
• Dining Room
• Kitchen
• Basement
• Hallway
• Add room
None Units • Fahrenheit
• Celsius
Fahrenheit Which temperature scale would you like to
use?
None RedLINK
Devices
• Add device
• Set up later
Use to connect RedLINK wireless
Accessories.
List of compatible RedLINK accessories
shown on page 4. Thermostat display will
guide you through linking RedLINK
accessories to thermostat.
None Outdoor
temperature
• None
• Wired
• Internet
None Outdoor temperature is used for balance
point lockout, aux heat lockout, frost control,
high and low outdoor temperature lockouts
for ventilation
2000 System Type • Conventional
Forced Air Heat
• Heat Pump
• Radiant Heat
• None (cool only)
Conventional
Forced Air Heat
2010 Equipment
Type
Conventional Forced
Air Heat
• Standard Efficiency
Gas Forced Air
• High Efficiency Gas
forced air
• Oil Forced Air
• Electric Forced Air
• Hot water Fan Coil
Heat Pump
• Air to Air
• Geothermal
Radiant Heat
• Hot Water Radiant
Heat
• Steam
None (cool only)
This ISU is not displayed when ISU 2000
Heating System Type is set to None (Cool
Only).
Available options depend on “System Type”
setting
Cycle Rate and Fan Operation automatically
default to the correct settings based on the
equipment type selected.
2060 Reversing Valve • O (O/B on Cool)
• B (O/B on Heat
O (O/B on Cool) Only displayed if the system type (ISU 2000)
is set to Heat Pump