User manual

Power up and bind a Remote Access
Gateway (RFG100)
Connect the Gateway to the power
supply and turn on the power.
To bind the Remote Access
Gateway (RFG100)
1
Press and hold the button on the
base of the gateway unit until you see
a flashing light next to the
2
On the Central Controller press
the green bind button
3
You should receive a SUCCESS message on the
Central Controller (if not go back and re-bind)
Now you need to set up a user account
and download the smartphone app.
Go to www.mytotalconnectcomfort.com and follow
the instructions there.
If the Gateway was in the
Connected Pack with
evohome, it is already
bound and there is no
need follow these binding
instructions.
!
If you are NOT following
GUIDED CONFIGURATION
follow these steps on your
Central Controller display
first:
1. Press and hold
“Settings”
for 3
seconds
2. Press the green tick
3. Select ADD GATEWAY
Central
Controller
1
Remote Access Gateway (RFG100)
P18 Step 3: Power up and bind devices