Installation

7
3.3 Connect each RedLINK accessory.
NOTE: Accessories must be at least 2
feet away from the thermostat during
the linking process.
3.3a While the Press Connect
message is displayed (listening
mode),
press and quickly release
the CONNECT button on each
new RedLINK accessory.
3.3b After a short delay (up to 15
seconds), check thermostat to
confirm the connection of each
RedLINK accessory. Touch s or
t to review the list.
3.3c Touch Done at the thermostat
after all new RedLINK accessories
are connected.
NOTE: Thermostat displays a
countdown timer while in the listening
mode. If it detects no activity for 15
minutes, it exits listening mode.
3.4 Finish the initial setup.
Finish the setup by selecting the
desired options. Touch Done after you
select the last option you want to
change.
The thermostat now displays its Home
screen and the thermostat setup is
complete.
M34150
THERMOSTAT TYPE
programmable
M33985
MCR33972
Outdoor Sensor
has been added
MCR34058
Press Connect on
New Accessories.
Listening mode