User Guide

To access the WiFi settings option, follow the

steps below.

1 Touch Menu on the thermostat home screen.

2 Touch the

or arrows until you see WIFI,

then touch Select.

3 Touch the or arrows to cycle through

the following options SETUP WIFI, WAC

SETTING and WIFI ON/OFF, and touch Select

on the option you want to edit.

Choose the SETUP WIFI option to get your

thermostat connected to your home’s WiFi

network (see instructions on page 10 for

more). For WAC SETTING and WIFI ON/OFF

information, see below.

WiFi settings

The Wireless Accessory Configuration (WAC) setting is an iOS-specific setting

that enables WiFi credentials to be securely transferred from an iOS device to the

thermostat. The WAC setting is enabled by default to simplify the WiFi connection

process. If you choose to disable it (not recommended), you’ll have to use a different

process to get your thermostat connected to WiFi.

WAC setting

If you want to disconnect your thermostat from

WiFi, follow the steps below.

1 Touch Menu on the thermostat home screen.

2 Touch the or arrows until you see WIFI,

then touch Select.

3 Touch the or arrows until you see WIFI

ON/OFF, then touch Select.

4 Touch the or arrows to choose WIFI ON

or WIFI OFF. Then touch Done to conﬁrm.

Turning thermostat WiFi on and off

Back Select

Done Cancel

Back Select