Atomic Clock with Wireless Indoor/Outdoor Thermometer USER MANUAL (TE211W) 1 1
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Honeywell Atomic Clock with Indoor/Outdoor Thermometer. This device includes precise time keeping and temperature monitoring features that you can use from the comfort of your home. In this package you will find: • Main unit (receiver) • Remote sensor (transmitter) TS03 Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know.
A PRECISE TIME WITH TEMPERATURE IN THREE-LINE LCD DISPLAY View of indoor/outdoor temperature and precise time. H B ALARM BUTTON Sets an alarm and allows displaying alarm status. C CHANNEL BUTTON Recalls the different remote sensor reading. CH A PM M D F E C G B D D MEMORY BUTTON 1). Recalls maximum or minimum temperature. 2). Clears the memory. E MODE BUTTON Changes display modes and confirms settings. F UP ( ) BUTTON 1). Increases the setting. 2). Enables atomic clock reception. 3).
REMOTE SENSOR FEATURES • Remote temperature transmission to the main unit via 433 MHz signal • Case can be wall mounted using built-in hanger • 100 feet transmission range without interference • Temperature display selection in Fahrenheit or Celsius • Transmission channel selection E A MADE IN CHINA C F D B TM THERMO – SENSOR A LED INDICATOR Flashes once when the remote sensor transmits the reading to the main unit. Flashes twice indicating low battery.
4. Install two “AA” size alkaline batteries (not included) matching to the polarities shown in the battery compartment. 5. Replace the battery compartment door and secure the screws. 6. Secure the remote sensor in the desired location. BATTERY INSTALLATION: MAIN UNIT 1. Open the battery compartment door. 2. Install two batteries (UM-3 or “AA” size 1.5V) matching the polarity as shown in the battery compartment. 3. Replace the battery compartment door.
MAXIMUM AND MINIMUM TEMPERATURE The maximum and minimum record of the indoor and remote temperature will be automatically stored in the memory of the main unit (receiver). Main unit will display the minimum, maximum and the current reading upon each press of MEMORY button. The unit will return to the current temperature display in 15 seconds. To clear the memory, press and hold "MEM" for 3 seconds and all stored readings will be erased.
SETTING CLOCK MANUALLY TIME ZONE 1. Press MODE to select the time display with weekday. 2. Select the time zone by pressing and holding the “ ” button for 3 seconds. 3. Keep holding until the desired time zone (Pacific, Mountain, Central or Eastern) is selected on the display map. YEAR, DATE, TIME, TEMPERATURE UNIT Press and hold MODE for 3 seconds: the year will flash. Press “ ” or “ ” to change the flashing digits. After the first value is set, press MODE again.
SPECIFICATIONS Temperature Measurement Main unit Indoor Temperature Proposed operating range : -5.0°C to +50.0°C / 23.0°F to 158.0°F : 0.1°C/ 0.2°F Temperature resolution Remote Sensor Proposed operating range with alkaline batteries : -20°C to + 70°C / -4°F to 158°F Proposed operating range with lithium batteries : - 38°F to 158°F ( -38.8 C° to 70°C) : 0.1°C/ 0.
DECLARATION OF CONFORMITY We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 1-503-612-8395 declare that the product Product No.: TE211W Product Name: Atomic Clock with Wireless Indoor/ Outdoor Thermometer Manufacturer: Hideki Electronics Ltd. Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung, New Territories, Hong Kong is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
