Submittal Sheet

1. SETUP T775L SERIES 2000 CTLR
17 62-0257–05
Fig. 35. Setup - Outputs - Options - Exit.
1.3.3.5. Exit Options Setup
Press the W button (or highlight EXIT and press the X
button) to exit and return to the Outputs menu.
Continue with “1.3.4. Setting up the Loops”
Fig. 36. Setup - Outputs - Loop 1 Menu.
1.3.4. Setting up the Loops
1. From the Outputs menu, use the S and T buttons
to highlight the desired loop (1 or 2 depending on
configuration).
2. Press the X button to display the selected loop
menu.
Continue with the remainder of this section to setup the
loops.
Fig. 37. Setup - Outputs - Loop 1 - Number of Relays.
1.3.4.1. Number of RELAYS
1. From the Loop 1 menu, use the Sand T buttons to
highlight # RELAYS.
2. Press the X button to display the number of relays.
3. Use the S and T buttons to select the number of
relays depending on setup. (SeeSee “1.3.1. Num-
ber of RELAYS” on page 14.)
4. Press the X button to accept the value and display
the Loop 1 menu.
SETUP
OUTPUTS
OPTIONS
USE SCHED
MIN OFF
DI OPTS
SHOW RT
EXIT
M24444
SETUP
OUTPUTS
LOOP 1
SETUP
OUTPUTS
LOOP 1
# RELAYS
INTEGRAL
DERIVATIV
ON DELAY
OFF DELAY
SCHEDULE
RESET
EXIT
M24445
ENTER
NUMBER OF
RELAYS FOR
LOOP 1
SETUP
OUTPUTS
LOOP 1
# RELAYS
3
SETUP
OUTPUTS
LOOP 1
# RELAYS
M24446