Product Overview

3
T6031E-H,J,K THERMOSTATS
63-2118—3
M7525
BRACKET DEPTH–1-11/16 (43)
OVERALL LENGTH–3-11/16 (94)
OVERALL DEPTH
(LESS SHAFT)–2-1/8 (54)
CLEARANCE BETWEEN
BRACKET AND BASE
OF DIAL–1/4 (6)
NO. 10-32 TAP (2)
2-1/4
(57)
Mounting Means:
T6031E,J,K: holes in back of case.
T6031F,G,H: front or back mounting.
Dimensions:
Case: see Fig.1 and 2.
Models without case, including brackets: see Fig. 3 and 4.
3/8 (10)
2 (51)
4-3/16
(106)
15/16
(24)
5-5/8
(143)
4-7/16 (113)
2-1/4 (57)
2-1/8 (54)
15/16
(24)
3/8
(10)
1-7/32
(31)
TOP KNOCKOUT IS 7/8 FOR
ALL BUT T6031H ENCLOSED.
1
1
M7523
KNOCKOUT FOR
1/2 CONDUIT (BOTH ENDS)
Fig. 2. Case mounting holes in in. (mm).
Fig. 1. T6031 mounting dimensions in in. (mm).
1-7/32
(31)
5/16 (9)
4-3/16
(106)
3/8 (10) DIA.
3/16 (5) DIA.
7/8 (22) DIA. KNOCKOUT
(BOTH ENDS)
M7524
Fig. 4. Back mounting bracket in in. (mm).
Finish:
Gray.
Underwriters Laboratories Inc. listed:
T6031F-H: File E4436, Vol. 4, Guide XAPX2;
T6031E,J: File E4436, Vol. 4, Guide XAPX;
T6031K: File SA481, Vol. 1, Guide SDFY.
Accessories:
105900 Mounting Clamp for mounting element to a pipe; for
T60031G,H,J Changeover Thermostats.
Fig. 3. Front mounting bracket in in. (mm).
ON THE 114496 BRACKET, THE MOUNTING HOLES ARE TWO
NO. 8-32 TAPPED HOLES. THE 107940 BRACKET IS MOUNTED
WITH A 5/32 (4) DIAMETER HOLE AT THE TOP AND A VERTICAL
5/32 X 5/16 (4 X 8) SLOT AT THE BOTTOM.
1
1
M9090
3
16
4
(106)
3
4
(19)
MOUNTING
HOLES
OVERALL LENGTH: 5 (127)
OVERALL DEPTH LESS
ADJUSTING DIAL SHAFT:
2-1/8 (54)