user manual

6.2 SETTING A NEW CAMERA VIEW (PTZ PRESET POSITION), CONTINUED
Using the camera PTZ functions, move to the desired position of the new view.
Press the
key followed by the key. The message:
will be displayed.
Now, press the view number (0 Ù 9). A total of ten views per camera are possible from
the keyboard.
• for example, .. stores the current PTZ position
for this camera as view 5.
• or
.. stores the current PTZ position for this
camera as VIEW 0 and the monitor will display the message:
NOTE: In some video systems, two digit view numbers
(00Ù 99) would need to be entered. Usually only the first
ten (0Ù 9) are manually available to the keyboard
operator.
Rev. A 6-2 HMXMU001056
03/16/05