Submittal Sheet
ST6008A,B,C ENERGY MANAGEMENT TIMERS
3
68-3002
PROGRAMMING
ST6008B,C 7-day Timer
The weekly program dial displays the seven days of the week
and the AM and PM indications for each day. The 24-hour dial
is marked in two-hour and AM and PM indications.
Set the Time Switch:
NOTE: Each tripper represents two hours.
A Push the desired number of trippers to the outer ring
position for the entire period the load is on. This places
the switch in the on position.
B Push the desired number of trippers to the inner ring
position to turn off the load. This places the switch in
the off position. See Fig. 1.
Set the Time:
NOTE: Rotate the outer dial clockwise by turning the minute
hand.
A Turn the minute hand clockwise until the day and time
on the outer dial are aligned with the triangle marker
(2:00 position) on the inner dial.
Example: To set the dial to Monday, 10:30 AM: Turn
the minute hand clockwise to rotate the outer dial
until Monday 10:30 AM is aligned with the triangle on
the inner dial. The hour and the minute hand show
10:30 AM.
ST6008A 24-hour Timer
The 24-hour dial is marked in quarter-hour and AM and PM
indications.
Set the Time Switch:
NOTE: Each tripper represents 15 minutes.
A Push the desired number of trippers to the outer ring
position for the entire period the load is on. This places
the switch in the on position.
B Push the desired number of trippers to the inner ring
position to turn off the load. This places the switch in
the off position. See Fig. 1.
M
1
2
3
4
5
INPUT
C
NO NC
OFF POSITION WITH TRIPPERS PUSHED IN
(TRIPPERS PUSHED OUT WILL CLOSE
CONTACTS 3 AND 4 AND TURN LOAD ON)
M11339
Set the Time:
NOTE: Rotate the outer dial clockwise by turning the minute
hand.
A Turn the minute hand clockwise until the time on the
outer dial is aligned with the triangle marker (2:00
position) on the inner dial.
Example: To set the dial to10:30 AM: Turn the
minute hand clockwise to rotate the outer dial until
10:30 AM is aligned with the triangle on the inner
dial. The hour and the minute hand show 10:30 AM.
Manual Override
All ST6008 units have an optional three-way manual override.
TERMINAL DESIGNATIONS