Submittal Sheet

7800 SERIES S7800A2142 KEYBOARD DISPLAY MODULE
32-00110—05 42
Heater Mode
Heater panel operation can be set by the user to one of the following settings:
• Automatic (default) – heater turns on when internal temperature reaches 0
o
C or below
• On – heater is on always
• Off – heater is off always
Heater mode setup is accessed from the Display setup menu (see Fig. 62). The current setting is displayed when the page
is initially entered.
Fig. 62. Heater mode setup
The up and down arrow buttons are used to scroll through the mode settings on the edit line. The right and left arrow
buttons are used to tab to the save commands, “Yes” and “No”. When the input focus is on the save commands the up and
down arrow buttons scroll between “Yes” and “No”. When the mode is set to the desired value the “Yes” command is
selected and the OK button is pressed to commit the change. If the user decides not to save the displayed mode, the “No”
command is selected and the OK button is pressed. In both save command cases control returns back to the Display
setup menu.
Display Password
The display module password can be edited to a new 3-digit setting. Password setup is accessed from the Display setup
menu (see Fig. 63).
Fig. 63. Display password setup