Submittal Sheet

ManualsBrandsHoneywell ManualsHeating Supplies4-Line 7800 Series Keyboard Display Module

7800 SERIES S7800A2142 KEYBOARD DISPLAY MODULE

39 32-00110—05

Jumper 1 Pilot Flame Establishing

Period (PFEP).

INTACT/CLIPPED Display shows state of PFEP jumper.

If jumper is intact, 7800 SERIES was

10 second PFEP. If jumper is clipped,

7800 SERIES has 4 second PFEP.

First Safety Time (for

RM/EC7850).

INTACT/CLIPPED Display shows state of First Safety

Time (EC7850) jumper. If jumper is

intact, EC7850 has 5 second First

Safety Time. If jumper is clipped, the

EC7850 has 3 second First Safety

Time.

Jumper 2 Pilot Valve. INTACT/CLIPPED Display shows state of PilotValve

(terminal no. 21). If jumper is intact,

RM7800G has Intermittent Pilot

Valve. If jumper is clipped, RM7800G

has 15 or 30 second Interrupted Pilot

Valve.

Main Trial Time (for

RM/EC7850).

INTACT/CLIPPED Display shows state of Main Trial

Time (EC7850)Valve (terminal no.

21). If jumper is intact, EC7850 has 5

second Main Trial Time. If jumper is

clipped, EC7850 has 3 second Main

Trial Time.

Jumper 3 Start-up Airflow Switch

(AFS) check.

INTACT (Disabled) /

CLIPPED (Enabled)

Display shows state of Start-up AFS

check jumper. If jumper is clipped,

RM7800 AFS check is enabled and if

jumper is intact, AFS check is

disabled.

Flame amp type Defines type of amplifier

installed.

STANDARD/AMP-

CHECK/SHUTTER

Display shows type of flame detection

system installed (i.e., as STANDARD,

AMP-CHECK/AMPLI-CHECK™ and

SHUTTER/ Dynamic Self-Checking).

Flame response Amplifier Flame Failure

Response Time (FFRT) in

seconds.

0.8 second, 1 second, 2

seconds, or 3 seconds

Purge time Timing value of purge card. mm:ss Two seconds to 30 minutes.

Manu code Postpurge time (enhanced

models only).

mm:ss Zero seconds to 63 minutes.

SW revision Software revision of burner

control module.

Annun status Current annunciator status.

T4 Proof of closure

Annunciator Proof of

closure.