Submittal Sheet

7800 SERIES S7800A2142 KEYBOARD DISPLAY MODULE
32-00110—05 34
The up and down arrow buttons are used to scroll between the two options on the edit line. The right and left arrow
buttons are used to tab to the save commands, “Yes” and “No”. When the input focus is on the save commands the up and
down arrow buttons scroll between “Yes” and “No”. When the order choice is set to the value desired the “Yes” command is
selected and the OK button is pressed to commit the change. If the user decides not to save the displayed order setting,
the “No” command is selected and the OK button is pressed. In both save command cases control returns back to the
Modbus setup menu.
Annunciator Setup
Annunciator setup is accessed from the Display Menu (see Fig. 46). This setup permits the customization of the
annunciator interface to match with the system usage of the annunciator. Two selections are possible from this menu:
• Terminal assignment
• Custom messages
Fig. 46. Annunciator setup
Terminal assignment allows the user to name the annunciator terminals to match with their system interlock purpose.
These assignments can be edited by selecting the “Terminal assignment” line and pressing the right arrow or OK button
(see Fig. 47). Each terminal, 4-22, can be named from one of the messages in Table 7. When the page is initially displayed
the current terminal assignments are displayed.
Fig. 47. Annunciator terminal assignment setup
Note that terminal 19 has two different names, one for gas and one for oil. The page displays next to the terminal number
which one is referenced (see Fig. 48).
Fig. 48. Annunciator terminal T19
The up and down arrow buttons are used to scroll through the terminal numbers when the input focus is on the terminal
selection line. As the terminal number changes the current name assigned for the terminal is displayed. The right and left
arrow buttons on this line are used to navigate to the name selection line (see Fig. 49).
Fig. 49. Annunciator terminal name selection line
TERMINAL
SELECTION
LINE
COMMAND
LINE
NAME
SELECTION
LINE
GAS
OR
OIL
LEFT
ARROW
RIGHT
ARROW