Submittal Sheet

7800 SERIES S7800A2142 KEYBOARD DISPLAY MODULE
15 32-00110—05
Historical Information Index
The S7800 displays historical information for the six most recent lockouts. Each of the six lockout records retains the
cycle when the fault occurred, a fault code, a fault message, and burner status when the fault occurred. The fault history
can be accessed from either the Home or Display Menu pages (see Fig. 19).
Fig. 19. Fault history menu
The fault history is displayed in order from most recent lockout, #1, on the first line to the oldest lockout on the last line.
The up and down arrow buttons are used to scroll to the lockout desired and the right arrow or OK button is pressed to
view the fault information (see Fig. 20) for that lockout.
Fig. 20. Fault history record
The fault record is scrollable using the up and down arrow buttons to see all lines of the information. The fault description
can take 1 or 2 lines to display and is presented on the line(s) below the fault code line. Below the sequence time line is
displayed the sequence state that the burner control was in at the time of the fault. This state description may take 1 or 2
lines to display also.
The left arrow button can be pressed to exit this fault record and go back to the Fault history menu (previous page).
The title bar displays which fault history record is displayed and indicates that the Troubleshooting guide can be
navigated to using the “Next page” (right arrow) button (see Fig. 21).
Fig. 21. Troubleshooting guide from fault history record
When the “Exit” command in the troubleshooting guide has input focus and the OK button is pressed control returns back
to the fault history record.
GO TO
TROUBLE
SHOOTING
GUIDE