Submittal Sheet

7800 SERIES S7800A2142 KEYBOARD DISPLAY MODULE
32-00110—05 14
Fig. 15. Troubleshooting guide faults section
The Faults section can be accessed starting at the beginning (see Fig. 15) or by going directly to a specific fault code (see
Fig. 16).
Fig. 16. Troubleshooting guide direct fault access
The Faults navigation bar contains the following commands that can be selected using the right and left arrow buttons:
• “Prev fault” – go to previous fault code
• “Exit” - exit Faults section and return back to Troubleshooting guide menu
• “Next fault” – go to next fault code
Pressing the OK button executes the command with the current input focus.
The Sequence and Status Hold section explains the meaning of different sequence state and status hold messages that
can display for a burner control on the display module (see Fig. 17). The up and down arrow buttons are used to scroll the
lines of the explanation.
Fig. 17. Troubleshooting guide sequence section
The Sequence/Status Hold navigation bar (see Fig. 18) contains the following commands that can be selected using the
right and left arrow buttons:
• “Prev sequence” – go to previous sequence/status hold message
• “Exit” - exit Sequence/Status Hold section and return back to Troubleshooting guide menu
• “Next sequence” – go to next sequence/status hold message
Pressing the OK button executes the command with the current input focus.
Fig. 18. Troubleshooting guide sequence section (continued)