Install Guide

Pairing the Adapter and the Doorbell
1. Press and hold the Setting button on the doorbell for three seconds.
 Press the button on the back of the adapter.
3. 
Music button to select the ring for the doorbell.
 
select a halo light color (if available ) for that doorbell.
 When the wiring is complete, snap the wireless adapter onto the wall plate.
Maintenance
Your adapter requires no maintenance except to periodically change the battery. If using
the correct battery, its life should be approximately:
• 
Low Battery Notification

until batteries are replaced.
Specications
Doorbell Adapter
Operating Temperature 32°F to 122°F (0ºC to 50ºC)
RF Frequency US/Canada 916.8 MHz
Range (open eld) Up to 350 ft. (106 m)
Sound Level (typical) -
RF Power <1mW
Battery Type CR2032 (3V)
Battery Life (5 activations/day) Up to 2 years