Wireless Remote Operating Manual

Wireless Entry/Exit Remote
3
69-2591EFS 01
Troubleshooting
Symptom Possible Cause Action
LED is flashing red. The battery is low. Replace the CR2450 coin cell battery.
No LED when button is
pressed.
The battery has failed. Replace the CR2450 coin cell battery.
LED is amber. The remote is no longer connected
to the thermostat.
Contact your heating and cooling contractor
for assistance.
The thermostat does not
change when the button(s)
are pressed.
The battery has failed. Verify that the LED flashes green when a
button is pressed. If there is no LED, replace
the CR2450 coin cell battery.