Installation Information

Installation instructions–RCWL301A
3 69-2139EFS—03
Wireless Converter / Extender / Push and Door Contacts
The converter can be used as a standalone wireless push or as an interface for
door contacts.
Open the bell push/converter
Using a ball point pen press at point A shown in fig 8. Remove the cover. Undo the
retaining screw B and remove the back of the push.
Use the push/converter/extender with door contacts
Connect the push/converter/extender to the door contacts using the bell wire supplied.
Fit the Push/Converter/Extender Battery
Insert the CR2032 coin cell. Ensure the face marked ‘+’ is uppermost (Fig. 9).
When the door contacts (a normally closed circuit) are separated/opened, the
chime will make a fixed alert sound and the icon assigned to the converter will
flash.
Mount the door contacts to the door and door frame
Fix the push/converter/extender
Mount using either the double-sided adhesive pad or the screws provided. (See Fig.
10). Test your converter before mounting. Avoid mounting to metal structures.
Important note: Additional wiring can be brought into the push through the grommet in
the back of the push. Once the grommet has been pierced or removed, we
recommend that the push is mounted indoors.
Additional functions for Wireless Converter/Extender
It can be used to interface with an existing wired doorbell system or any of the
following:
• A standard wired bell push
• A lit bell push and transformer
• A door or window contact
• Any device with N/O or N/C, voltage free contacts
• Any device which generates appropriate control signal
< 24V (AC or DC)
See typical connections (C1-7)
Fig. 8
A
B
CR2032CR2032
Fig. 9
Fig. 10
M27168
CABLE ENTRY GROMMET
Diagram Application Operation
C1
wired bell push or 'normally
open' switch/contacts
C2
door/window contact, 'normally
closed' switch/contacts
C3
a lit push (with transformer) when
switch is closed, chime will sound
C4
landscape push/converter -
terminal positions
C5
a typical wired bell or chime circuit -
transformer powered
C6
converter connected to a wired bell
or chime -transformer powered
C7
converter connected to a wired bell
or chime circuit - battery powered
when switch is closed,
chime will sound
when switch is opened, chime
will make a fixed 'ALERT' sound
when switch is closed,
chime will sound
when push is operated,
chime will sound
when push is operated,
chime will sound