Use and Care Manual

12
12 Set R-switch position.
Set the R-switch up or down based on your wiring notes in Step 7.
If you have one R wire (labeled R, RH, or Rc ), then set the R-switch to the up
position (1 wire) and insert that wire into the R terminal.
If you have two R wires (one labeled R or RH and the other labeled Rc), then set
the R-switch to the down position (2 wires), insert the R or RH wire into the R
terminal, and insert the Rc wire into the Rc terminal.
R (only)
R
C (only)
R
H (only)
R
R
C
Set the R-Switch
If you checked Insert Wire(s) into Terminal(s
RH
RC
R wire
R
C
wire
R
H wire
R wire
R
C wire
R
H wire
R
C wire
Rc
R
Rc
R
Rc
R
Rc
R
Rc
R
R-Switch
UWP Mounting System