Smart Home Base Station Placement Guide

Examples of good locations for placement of the C1 OR C2 Wi-Fi cameras are shown below.
Installation Notes
 Ensure that electrical
power and a Wi-Fi
connection are available
when selecting the
location for the camera.
 Select a location that
ensures the camera’s
wide angle viewing area
covers doors, windows
and other points of entry
such as stairwells.
 A primary location should
face a point of entry such
as a front/back door or in
a location such as a foyer
or room that allows the
camera’s wide angle lens
to capture the entire room.
 In order to prevent
frequent and unnecessary
motion alerts, avoid
pointing the camera
directly at televisions,
windows or portraits.
 The C2’s viewing angle
can be tilted to provide
optimal coverage. This is
especially helpful when
the camera is wall-
mounted.

C2
*C2
iPCAM-devices-floor-plan-001-V0
ACCESS
SENSORS
C2
ACCESS
SENSORS
Indicates Possible Alternate Locations
*C1
or
C2
WIC2
C1 or C2
*C1 or C2
*C1
or
C2
C1 or C2
*ANGLE CAMERA TO ENSURE VIEWING AREA COVERS DOORS AND OTHER ENTRY POINTS
*C1 or
C2