Product Overview

7800 SERIES Q7800A,B 22-TERMINAL UNIVERSAL WIRING SUBBASE
65-0084—4 4
Fig. 3. Top and front view of Q7800B1011 Wiring Subbase (4-sided) with dimensions in in. (mm).
INSTALLATION
When Installing this Product…
1. Read these instructions carefully. Failure to follow them
could damage the product or cause a hazardous
condition.
2. Check the ratings given in the instructions and on the
product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced, Flame
Safeguard service technician.
4. Disconnect the power supply before beginning
installation to prevent electrical shock and equipment
damage. More than one disconnect may be involved.
5. All wiring must comply with applicable local electrical
codes, ordinances, and regulations.
6. All wiring must be NEC Class 1 (Line Voltage).
12
13
14
15
16
17
18
19
20
21
22
G
L2(N)
3
4
5
6
7
8
9
10
F
7/8 in. (22) KNOCKOUTS (9)
FOR 1/2 in. CONDUIT
USE NO. 6 MOUNTING SCREWS (4)
1 (25)
1 (25)
M9883
REMOVE ONLY FOR
TERMINAL TEST ACCESS.
1
1
2-1/8 (54)
2-1/4
(64)
1-11/32
(34)
1-11/32 (34)
1-13/32
(36)
4-31/32
(126)
4-31/32 (126)
1-5/8
(41)
27/32 (21)
2-9/32 (58)
23/32 (18)
3/4 (19)
3/4 (19)
2-1/8 (54)
3 (76)
23/32 (18)
3/4 (19)
3/4 (19)