Instructions / Assembly

Q3200U UNIVERSAL HOT SURFACE IGNITER KIT
3 69-2334—01
Fig. 2. Igniter brackets A, C, D, E, and F template; dimensions in in. (mm).
A
1
2
PLACE REMOVED IGNITER OVER TEMPLATE OUTLINE
HONEYWELL
BRACKET AND ASSY
(NOT TO SCALE)
HONEYWELL
BRACKET AND ASSY
(NOT TO SCALE)
C
D
BRACKET A
USE BRACKET A. REMOVE TAB 2. USE BRACKET A. REMOVE TAB 1.
E
USE BRACKET E
ORANGE GASKET
USE BRACKET D
2
USE BRACKET C
TAB 2
TAB 1
PLACE REMOVED IGNITER OVER TEMPLATE OUTLINE
1
HOLE FOR
THREAD
FORMING
SCREW
FOR BRACKET E, REUSE ORANGE GASKET FROM IGNITER BEING REPLACED.
2
EACH BRACKET HAS A HOLE FOR THE THREAD FORMING SCREW, WHICH IS INCLUDED IN THE IGNITER KIT.
1
M28765
F
USE BRACKET F
BRACKET D
BRACKET C
BRACKET E
USE BRACKET A. REMOVE TAB 1.
BRACKET F
METAL BRACKET
2 5/16 (58.4) [ACTUAL]
2 5/32 (54.7)
[ACTUAL]
2 5/16 (58.4) [ACTUAL] 2 5/16 (58.4) [ACTUAL]
2 5/16 (58.4) [ACTUAL]
2 5/16 (58.4) [ACTUAL]
GASKET GOES ON BURNER SIDE OF BRACKET
2 5/16 (58.4) [ACTUAL]