User Manual
Table Of Contents
- PM45 and PM45c
- Customer Support
- Get Started
- Set Up the Printer
- Connect the Printer
- Configure the Printer
- Printer Configuration Menus
- Configure the Printer from the Web Page
- Configure the Printer with PrintSet 5 or Print Set MC
- Configure the Printer with Programming Commands
- Change Background Image for the Ready Screen
- Printer Profiles
- Save a Printer Profile from the Web Page
- Load a Printer Profile from the Web Page
- Save a Printer Profile from the Main Menu
- Load a Printer Profile from the Main Menu
- Load a Printer Profile Using Programming Commands
- Install a Configuration File from a USB Storage Device
- Export a Configuration File to a USB Storage Device
- Quick Choice Menu (Shortcuts)
- Customize the Printer Web Page
- Troubleshooting
- Maintenance
- Product Specifications
- Default Settings
- Print Labels with INPrint
- Accessories and Options
PM45 and PM45c User Guide 83
Mange I/O
To view these settings:
• From the printer Main Menu, select Settings > System Settings > Manage I/O.
• From the printer web page, click Configure > System Settings > Manage I/O.
Manage Services
Note: You will only see Manage Services from the menus if you have an Ethernet or
Wireless module installed in the printer.
Note: The printer supports 10/100 Mbps Ethernet (10BASE-T, 100BASE-T)
To view these services:
• From the printer Main Menu, select Settings > System Settings > Manage
Services.
• From the printer web page, go to Configure > System Settings > Manage
Services.
System I/O
Setting
Description Default
Ethernet Determines if the printer is allowed to communicate using Ethernet
communications.
Enable
Wireless 802.11 Determines if the printer is allowed to communicate using its 802.11
radio. Supported only if the optional Wi-Fi module is installed.
Enable
Bluetooth Determines if the printer is allowed to communicate using its 802.11
radio. Supported only if the optional Wi-Fi+Bluetooth module is
installed.
Enable
RFID Determines if the printer is allowed to communicate using its RFID
radio. Supported only if the RFID module is installed.
Enable
Virtual COM Determines if you can enable the USB port to be used as a virtual
serial port. When you change this setting, you must restart the
printer to enable the new setting.
Disable
System
Network
Service Setting
Description Default
Web Server Determines if the web server is enabled in the printer. Enable
FTP Determines if the printer can use File Transfer Protocol. Disable
Net1 Determines if the printer can use Telnet to communicate with
Fingerprint.
Enable
SNMP Determines if the printer can use SNMP. Enable
LPR Determines if the printer can use the line printer server (LPR)
daemon.
Enable
IKEv2 Determines if the printer can use IKEv2. Disable