User Manual

80 PM45 and PM45c User Guide
Print Quality
To view these settings:
• From the printer Main Menu, select Settings > Printing > Print Quality.
• From the printer web page, click Configure > Printing > Print Quality.
RFID
To view these settings:
• From the printer Main Menu, select Settings > Printing > RFID.
• From the printer web page, click Configure > Printing > RFID.
Print Quality
Setting
Description Default
Print Speed Sets how fast the printer prints labels. The unit of measure is
defined in the Unit of Measure parameter.
200dpi:102
300dpi:102
600dpi: 51
Media Sensitivity Sets the level of sensitivity of the media to the printhead heat
for media and ribbon.
High
Darkness Sets the image darkness for media and ribbon. Adjust this
parameter with the Media Sensitivity parameter. Range is 1 to
100.
55
Contrast Adjusts the blackness of the printing on the label in 2%
increments from -10% to +10%.
+0%
Label Rotation Rotate the label in 0 (no rotation), 90, 180, 270 degree in
clockwise direction.
0 deg
RFID Setting Description Default
Retries Sets the number of RFID Labels the printer tries to access
after it fails to read or write to an RFID Tag. Range is 1 to 10.
0
Void Texts Sets the text that is printed on each label that has a faulty
RFID tag. Range is 1 to 16 characters.
VOID
RFID Tag
Position
Sets the distance the label is moved to align the RFID tag over
the antenna to allow a successful read and write operation.
Unit of measurement is defined in the Unit of Measure
parameter. Range is -10000 to +10000
0 dots
Output Power Sets the amount of field strength the antenna applies to
communicate with the RFID tag.
18
RFID Tag Type Select the type of RFID tag used in the printer. Read and
Write