User Manual

76 PM45 and PM45c User Guide
Bluetooth
To view these settings:
• From the printer Main Menu, select Settings > Communications > Bluetooth.
• From the printer web page, click Configure > Communications > Bluetooth.
PAC Sets the name of the PAC (Protected Access Credential)
file that is used for EAP-FAST authentication. The printer
uses this file if Acquire PAC is ON and the current
installed PAC fails to authenticate the printer to the
network.
eap-fast.pc
Acquire PAC Determines if automatic PAC file provisioning is on for
EAP-FAST authentication.
On
(IPv4) IP Assignment
Method
Specifies how the printer obtains an IP address. Manual
(IPv4) IP Address Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
0.0.0.0
Subnet Mask Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP network (IPv4).
0.0.0.0
Default Router Specifies the IP address of a router that is used when a
device sends a packet to another subnet or to an
unknown destination.
0.0.0.0
DHCP Response Specifies if the printer receives DHCP responses by
broadcast or unicast.
Broadcast
(IPv6) IP Assignment
Method
Specifies how the printer obtains an IP address (for IPv6
networks).
Automatic
(IPv6) IP Address Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv6).
802.11 Wireless
Setting
Description Default
Bluetooth
Setting
Description Default
Device Name Sets the name that identifies the printer in the
Bluetooth network. Maximum length is 16 characters.
Printer model number
and serial number.
Discover Determines if other Bluetooth devices can detect the
printer
Disable
Passkey Sets the passkey that is used when pairing Bluetooth
devices to the printer. Range is 1 to 16 characters
(case-sensitive)
-
Reserve Determines if the printer is exclusively reserved for one
Bluetooth device. The first Bluetooth device that
connects with the printer locks out any other
connection attempts.
Disable