User Manual
Table Of Contents
- PM45 and PM45c
- Customer Support
- Get Started
- Set Up the Printer
- Connect the Printer
- Configure the Printer
- Printer Configuration Menus
- Configure the Printer from the Web Page
- Configure the Printer with PrintSet 5 or Print Set MC
- Configure the Printer with Programming Commands
- Change Background Image for the Ready Screen
- Printer Profiles
- Save a Printer Profile from the Web Page
- Load a Printer Profile from the Web Page
- Save a Printer Profile from the Main Menu
- Load a Printer Profile from the Main Menu
- Load a Printer Profile Using Programming Commands
- Install a Configuration File from a USB Storage Device
- Export a Configuration File to a USB Storage Device
- Quick Choice Menu (Shortcuts)
- Customize the Printer Web Page
- Troubleshooting
- Maintenance
- Product Specifications
- Default Settings
- Print Labels with INPrint
- Accessories and Options
62 PM45 and PM45c User Guide
• Turn the tension bar screw counterclockwise to move the bar forward and
increase the tension.
Pressure Adjustment
You may need to adjust the printhead pressure on the printer if:
• you are using thicker or thinner media than previously
• your labels are printing lighter on one side than the other
• your thermal transfer ribbon starts to crease
Do not use a higher printhead pressure than necessary. It may increase the wear on
the printhead and shorten its life.
1. Open the media cover.
2. Use a straight-screwdriver to adjust the pressure screw.