User Manual

30 PM45 and PM45c User Guide
Calculate the RFID Tag Position
You can perform a manual calculation to come up with an estimate of the RFID Tag
Position. Because this value is an estimate, you may need to slightly adjust the cal-
culated value to achieve the best results.
1. Make sure Label Top and Label Rest are set to 0.
2. Measure the yChip value, which is the distance between the RFID chip and the
media edge aligned with the tear bar.
3. The yAntDist for the printers are 280 dots, 35mm, 1.378in.
4. Use this formula to calculate the estimated Tag Position:
TagPosition=yChip - yAntDist
Configure RFID settings for Icon Printer using Web Page
To configure the RFID media settings on the icon printer, the printer must be
connected to an Ethernet or wireless network and you must know the printer IP
address.
1. Open a web browser on your PC.
2. In the address bar, type https:// followed by the printer IP address and press
Enter. The printer web page appears.
3. Click Login.
4. Type your Username and Password and then click Login. The default value for
Username is admin and the default value for Password is pass.
5. Click Configure > Printing > RFID. The RFID settings page appears.
6. Change RFID settings as needed. You can also click Default Settings to
restore all default RFID settings.
7. Click Save.
Label top
of form
Media edge
(aligned with
tear bar)
yChip
RFID chip