User Manual
Table Of Contents
- PM45 and PM45c
- Customer Support
- Get Started
- Set Up the Printer
- Connect the Printer
- Configure the Printer
- Printer Configuration Menus
- Configure the Printer from the Web Page
- Configure the Printer with PrintSet 5 or Print Set MC
- Configure the Printer with Programming Commands
- Change Background Image for the Ready Screen
- Printer Profiles
- Save a Printer Profile from the Web Page
- Load a Printer Profile from the Web Page
- Save a Printer Profile from the Main Menu
- Load a Printer Profile from the Main Menu
- Load a Printer Profile Using Programming Commands
- Install a Configuration File from a USB Storage Device
- Export a Configuration File to a USB Storage Device
- Quick Choice Menu (Shortcuts)
- Customize the Printer Web Page
- Troubleshooting
- Maintenance
- Product Specifications
- Default Settings
- Print Labels with INPrint
- Accessories and Options
PM45 and PM45c User Guide 19
Load Media from an External Supply
You can place the media supply, such as fanfold tickets or tags, behind the printer
or underneath it.
1. Open the media cover.
2. Turn the printhead lift lever counterclockwise to raise the printhead.
3. Feed media through the slot in the back of the printer (or from the slot in the
bottom of the printer) and route it through the print mechanism.
4. Turn the printhead lift lever clockwise to close the printhead. The printer
performs the action defined by the Head Down Action setting (Smart
calibration).