Quick Start Guide

11
Print Button
Use the Print button to feed media, pause print jobs, cali-
brate, test feed, and print.
Print a Test Label on the LED Display Model
Once the printer is turned on, the printer goes through its
startup sequence and all of the LEDs light up. When the last two
LEDs are lit (Printhead Hot and Maintenance),
1. Press and hold the Print button until the test label starts to
print.
2. Release the Print button.
Your test labels prints.
Printer State Print Button Action
Startup Press the Print button during startup to enter
Calibration mode or to restore defaults if the
printhead is lifted.
Ready Press the Print button to advance the media.
Press and hold the Print button for smart
calibration.
Printing Press the Print button to stop or pause
printing. The printer stops after completing
the current label.
Paused Press the Print button to resume printing.
Error Press the Print button to advance the media.