User Manual

Chapter 1: About the Printer
8 User Instructions for PC42d Desktop Printer
5. Adjust the sensor’s position in accordance with the Table below:
Type of Medium
Position of Sensor
Black Label
Below the Black Mark
Gap
Aligned with left triangular mark
Other media
Aligned with right triangular mark (default
position)
Move the sensor to the triangular mark on the left of the ‘gap’ medium
Note:
1. When moving the sensor position, the user would need to re-align the paper;
otherwise the printing position may be inaccurate or paper-feeding may stop because
of incorrect position when pressing the “FEED” button, or flickering red light which is an
indication of irregularity.
2. When a user switches between different types of paper, the user must re-align the
papers each time. Otherwise the printing position may be inaccurate or paper-feeding
may stop because of incorrect position when pressing the “FEED” button, or flickering
red light which is an indication of irregularity.