User Manual

Chapter 1: About the Printer
4 User Instructions for PC42d Desktop Printer
Using Printer Button (continued)
Printer Button Operation
Description
Press and release the printer button
If the printer is in ‘idle’ mode, it will begin to feed
paper until it reaches the initial position of the
next label.
If printing is in progress, it will be suspended.
If printing has been suspended, it will restart.
Press the printer button for 3
seconds
If printing has been suspended, the printing job
will be terminated, and all printing jobs will be
discarded. The printer will return to ‘idle’ status.
LED Status Light
The LED status light can be in green, orange or red, with each indicating the printer’s
current status. Use the Table below to view the corresponding status of the LED light’s
color.
LED Status Light
LED Status
Description
Off
The printer is not connected to power.
Steady green color
The printer is in ‘idle’ mode and awaits the next
printing job.
Green flickering light after activation
There is an error in the printer’s RAM and
firmware upgrade is required. See “Firmware
Upgrade” on Page 22 for more information.
LED Status Light