Spec Sheet
Port Configuration
229 mm
(9.0”)
193 mm
(7.6”)
88 mm
(3.5”)
MS7600 Series Horizon
™
M E C H A N I C A L
E L E C T R I C A L
E N V I R O N M E N TA L
O P E R AT I O N A L
Dimensions 193 mm H x 88 mm D x 229 mm W (7.6” H x 3.5” D x 9.0” W)
Weight 2.88 kg (6.35 lbs)
Termination Three 10-pin modular RJ45
Cable Standard 2.1 m (7’) straight; for other cables call Metrologic
Input Voltage 5.2 VDC + 0.25 V
Power 2.6 W
Operating Current 500 mA
DC Transformers Class II; 5.2 VDC @ 650 mA
Laser Class IEC 60825-1:1993 + A1:1997 + A2:2001 Class 1
EMC FCC, ICES-003 & EN55022 Class A
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -40°C to 60°C (-40°F to 140°F)
Humidity 5% to 95% relative humidity, n o n - c o n d e n s i n g
Light Levels Up to 4842 Lux (450 footcandles)
Contaminants Sealed to resist airborne particulate contaminants
Ventilation None required
Scan Area
0 mm 50 mm 100 mm 150 mm 200 mm 250 mm
(0”) (2”) (4”) (6”) (8”) (10”)
221 mm
(8.7”)
Light Source Visible Laser Diode 650 nm + 10 nm
Laser Power 1.1 mW (peak)
Depth of Scan Field 0 mm - 203 mm (0” - 8.0“) for 0.33 mm (13 mil) bar code
Width of Scan Field 137 mm (5.4”) @ 40 mm (1.6”) ; 221 mm (8.7”) @ 178 mm (7.0”)
Scan Speed 2000 scan lines per second
Scan Pattern 5 fields of 4 parallel lines (omnidirectional)
Number of Scan Lines 20
Minimum Bar Width 0.127 mm (5.0 mil)
Decode Capability Autodiscriminates all standard bar codes;
for other symbologies call Metrologic
System Interfaces PC Keyboard Wedge, RS232, OCIA, Light Pen Emulation,
IBM 468x/469x, Stand Alone PC Keyboard, USB
Print Contrast 35% minimum reflectance difference
Number Characters Read Up to 80 data characters
Roll, Pitch, Yaw 360°, 60°, 60°
Beeper Operation 7 tones or no beep
Indicators (LED) Amber = laser on, ready to scan; Red = good read, decoding
Bar Code Minimum Element
0.132 mm (5.2 mil)
0.191 mm (7.5 mil)
0.264 mm (10.4 mil)
0.330 mm (13.0 mil)
0.478 mm (19.5 mil)
Metrologic Instruments, Inc. | 90 Coles Road | Blackwood, NJ 08012-4683
Telephone 856-228-8100 or 1-800-ID-METRO | Fax 856-228-6673
Specifications subject to change without notice.
Printed U.S.A., Copyright March 2002
Metrologic, All rights reserved.
www.metrologic.com
USA AOA (only) South America Brazil (only)
Tel. 1.800.ID.METRO Tel. 1.617.806.1400 Tel. 5511.5182.7273 Tel. 5511.5182.8226
info@metrologic.com info@aoa.metrologic.com info@sa.metrologic.com info@br.metrologic.com
Asia China (only) Japan (only) Europe
Tel. 65.6842.7155 Tel. 86.512.2572511 Tel. 81.03.3839.8511 Tel. 49.89.89019.0
info@sg.metrologic.com info@cn.metrologic.com info@jp.metrologic.com info@europe.metrologic.com
DS7620
Scan Volume
Dimensions
203 mm (8”)
179 mm (7”)
152 mm (6”)
127 mm (5”)
102 mm (4”)
76 mm (3”)
51 mm (2”)
25 mm (1”)
0 mm (0”)
116 mm (4.6”)
58 mm
(2.3”)
73˚91˚
MS76xx-13 MS76xx-37
RS232/IBM RS232/
Light Pen
Keyboard Wedge/
OCIA Stand Alone Keyboard/
USB
AUX AUX
1 0
1
1 0
1
1 0
1