Submittal Sheet

ManualsBrandsHoneywell ManualsDamper actuators24 Vac Spring return-foot mounted, Modulating

Table Of Contents

PRODUCT DATA

63-2556-01

M7215

Damper Motors

APPLICATION

M7215 Damper Motors provide 25 lb-in. torque with spring

return and 2-10 Vdc modulating control of economizer

systems, ventilation dampers and combustion air dampers

used in residential or commercial HVAC equipment.

FEATURES

• M7215 Damper Motors provide modulating control of

economizer dampers from a 2-10 Vdc controller.

• Quiet, high efficiency drive motor.

• High impact, glass-fiber reinforced plastic case is

rugged, lightweight and corrosion resistant.

• Provides 2-10 Vdc output signal proportional to the

shaft position.

Contents

Application ........................................................................ 1

Features ........................................................................... 1

Specifications ................................................................... 2

Ordering Information ........................................................ 2

Installation ........................................................................ 3

Operation and Checkout .................................................. 4

Summary of content (4 pages)

PAGE 1
M7215 Damper Motors PRODUCT DATA FEATURES • M7215 Damper Motors provide modulating control of economizer dampers from a 2-10 Vdc controller. • Quiet, high efficiency drive motor. • High impact, glass-fiber reinforced plastic case is rugged, lightweight and corrosion resistant. • Provides 2-10 Vdc output signal proportional to the shaft position. APPLICATION M7215 Damper Motors provide 25 lb-in.
PAGE 2
DAMPER MOTORS SPECIFICATIONS Models: ML7215: 25 lb-in. (2.8 N•m) torque, foot-mounted spring-return damper motor with 2-10 Vdc feedback signal. Accepts 2-10 Vdc control signal. Dimensions: See Fig. 1. Motor Rotation (Viewed From Shaft End): Closed Position: Limit of clockwise rotation. Open Position: Limit of counterclockwise rotation. Crank Arm Rotation Limits: See Fig. 2. Shipped with shaft in closed position. Electrical Ratings: Supply Voltage: 24 ±6 Vac 50/60 Hz. Power Consumption: 24 Vac, 60 Hz: 8.
PAGE 3
DAMPER MOTORS Table 1. M7215 Accessories. 7640QF Terminal Enclosure—provides wiring enclosure for electrical terminal connections. Enclosure can be used with or without 40784EHB Screw Terminal Adapter. Bag assembly includes: terminal housing, cover plate and mounting screws. M3855 4074EGR Crank Arm Assembly. M3856 Q298B Linkage Hardware—enables linking the motor to an additional damper.
PAGE 4
DAMPER MOTORS 5. 6. 4. If there is an excess length of linkage rod, cut it to size. Make necessary minor adjustments until desired operation is obtained. Tighten all nuts and set screws. If questions arise regarding this product, contact your distributor or local Honeywell representative. M7215 IN+ CONTROL MOTOR IN– TR 2 OUT TR1 – WIRING CAUTION OUT All wiring must comply with applicable codes and ordinances. Refer to Fig. 3 and 4 for typical hookups.