Brochure

418 70-6910
Modutrol IV Motors
M6284; M6294 Floating Modutrol IV™ Motors, for Slaving
Applications only
These Series 62 Modutrol IV™ Motors non-spring return oating
control motors are used with controllers that provide a switched
SPDT or oating output to operate dampers or valves. These
motors also have an internal electrically isolated feedback
potentiometer that provides indication of the motor shaft position.
Some models can be used for slaving Series 90 Motors.
• Integral junction box provides NEMA 3 weather protection if motor is
mounted in the upright position
• Motor and circuitry operate from 24 Vac
• Quick-connect terminals are standard – screw terminal adapter is
available
• Adapter bracket for matching shaft height of older motors is available
• Motors have eld adjustable stroke (90 to 160 degrees)
• Integral auxiliary switches are available factory mounted, or can be
eld added
• All models have dual shafts (slotted and tapped on both ends)
• All models have auxiliary switch cams
• Fixed torque throughout the entire voltage range
• Motors are designed for either normally open or normally closed
valves and dampers
• Include electrically isolated feedback potentiometer that provides
shaft position indication
• -S models with non-linear feedback are for slaving applications only
Application: Electric
Control Signal: Floating
Frequency: 50 Hz; 60 Hz
Fail Safe Mode: Non-Spring Return
Auxiliary Switch Ratings: AFL - 120 Vac – 7.2A; ALR - 120 Vac –
43.2A; AFL - 240 Vac – 3.6A; ALR - 240 Vac – 21.6A
Shaft Rotation (upon control signal increase): Dependent on wiring
(normally closed)
External Auxiliary Switches Available: Ye s
Mounting: Foot-mounted
Power Consumption: Driving – 15 VA
Feedback: Ye s
Shaft Dimensions: 0.375 in. Square (10 mm Square)
Motor Shafts: 2; Dual-ended shaft
Deadweight Load on Shaft: Either End – 200 lbs.; Combined on both
Shafts – 300 lbs.
Approximate, Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in.
deep (164 mm high x 140 mm wide x 185 mm deep)
Ambient Temperature Range: -40°F to +150°F (-40°C to +60°C)
Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436,
Guide No. XAPX for USA and Canada
Approvals, CE: EN55011 (Emission) EN50082-2 (Immunity)
73/23/EEC (LVD)
Approvals, RoHS: 2011/65/ES
Comments: non-linear feedback, for slaving applications only
Accessories:
220736A/U – Internal Auxiliary Switch Assembly - 1 Switch
220736B/U – Internal Auxiliary Switch Assembly - 2 Switches
220738A/U – Adapter Bracket. Adjusts shaft height to match Modutrol
III motors
220741A2-62/U – Screw Terminal Adapter Kit for Series 62 Modutrol
IV Series 2 motors - Converts quick-connect terminals to screw
terminals
221455A/U – Innitely adjustable Motor Crank Arm
4074ERU/U – Weatherproong kit. Protects motor from driving rain
when mounted in any position. Not needed if motor is mounted
upright.
50017460-001/U – 24/120/230 Vac Internal Transformers for Series 2
Motors
50017460-003/U – 120 Vac Internal Transformers for Series 2 Motors
Material Number Torque
Rating
(lb-in.)
Torque
Rating
(Nm)
Supply
Voltage
Timing,
Nominal
Internal
Auxiliary
Switch
Electrical
Connections
Internal
Transformer
Weight Includes Tradeline
Value
Factory
Stroke
Setting
Stroke
M6284A1055-S/U 150 lb-in. 17 Nm 120V 30 - 60 sec 0 Quick-
connect
terminals
50004263-
003
7.5 lb Transformer 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
M6284A1071-S/U 150 lb-in. 17 Nm 120V 30 - 60 sec 0 Screw
terminals
50004263-
002
7.5 lb Transformer 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
M6284A1089-S/U 75 lb-in. 8.5 Nm 120V 15 - 30 sec 0 Screw
terminals
50004263-
002
7.5 lb Transformer 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
M6284A1097-S/U 150 lb-in. 17 Nm 24V 30 - 60 sec 0 Quick-
connect
terminals
None 6.5 lb 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
M6284C1010-S/U 150 lb-in. 17 Nm 24V 30 - 60 sec 2 Screw
terminals
None 6.5 lb Bag Assembly 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
M6284D1000-S/U 150 lb-in. 17 Nm 24V 30 - 60 sec 0 Quick-
connect
terminals
None 6.5 lb Tradeline 160 degrees Adjustable; 90
to 160 degrees,
Symmetrical
M6284D1026-S/U 150 lb-in. 17 Nm 24V 30 - 60 sec 0 Quick-
connect
terminals
None 6.5 lb 220741A2-62
Screw Terminal
Adapter Kit
Tradeline 90 degrees Adjustable; 90
to 160 degrees,
Symmetrical
M6284D4004-S/U 150 lb-in. 17 Nm 24V 30 - 60 sec 0 Quick-
connect
terminals
None 6.5 lb Tradeline 160 degrees Adjustable; 90
to 160 degrees,
Symmetrical
M6284F1013-S/U 150 lb-in. 17 Nm 24V 30 - 60 sec 2 Quick-
connect
terminals
None 6.5 lb 160 degrees Adjustable; 90
to 160 degrees,
Symmetrical
M6284F1062-S/U 150 lb-in. 17 Nm 24V;
120V;
230V
30 - 60 sec 2 Quick-
connect
terminals
50004263-
001
7.5 lb Transformer 90 degrees Adjustable; 90
to 160 degrees,
Asymmetrical