Brochure

70-6910 433
Modutrol IV Motors
Commercial Components
M9164; M9174; M9184; M9191; M9194 Modutrol IV™ Motors
Series 90 Modutrol™ IV Motors are non-spring return modulating
proportional control motors used with controllers that provide a
Series 90 output to operate dampers or valves.
• Integral junction box provides NEMA 3 weather protection if motor is
mounted in the upright position
• Motor and circuitry operate from 24 Vac
• Quick-connect terminals are standard; screw terminal adapter is
available
• Adapter bracket for matching shaft height of older motors is available
• Motors have eld adjustable stroke (90 to 160 degrees)
• Integral auxiliary switches are available factory mounted, or can be
eld added
• All models have dual shafts (slotted and tapped on both ends)
• All models have auxiliary switch cams
• Fixed torque throughout the entire voltage range
Application: Electric
Control Signal: Proportional, 135 ohm
Frequency: 50 Hz; 60 Hz
Fail Safe Mode: Non-Spring Return
Auxiliary Switch Ratings: AFL - 120 Vac – 7.2A; ALR - 120 Vac –
43.2A; AFL - 240 Vac – 3.6A; ALR - 240 Vac – 21.6A
External Auxiliary Switches Available: Ye s
Mounting: Foot-mounted
Feedback: No
Shaft Dimensions: 0.375 in. Square (10 mm Square)
Motor shafts: 2; Dual-ended shaft
Deadweight Load on Shaft: Either End – 200 lbs.; Combined on both
Shafts – 300 lbs.
Approximate, Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in.
deep (164 mm high x 140 mm wide x 185 mm deep)
Ambient Temperature Range: -40°F to +150°F (-40°C to +60°C)
Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436,
Guide No. XAPX for USA and Canada
Approvals, CE: EN55011 (Emission) EN50082-2 (Immunity)
73/23/EEC (LVD)
Approvals, RoHS: 2011/65/ES
Accessories:
220736A/U – Internal Auxiliary Switch Assembly - 1 Switch
220736B/U – Internal Auxiliary Switch Assembly - 2 Switches
220738A/U – Adapter Bracket. Adjusts shaft height to match Modutrol
III motors
220741A2-90/U – Screw Terminal Adapter Kit for Series 90 Modutrol IV
Series 2 and Series 3 motors - Converts quick-connect terminals to
screw terminals
221455A/U – Innitely adjustable Motor Crank Arm
4074ERU/U – Weatherproong kit. Protects motor from driving rain
when mounted in any position. Not needed if motor is mounted
upright.
50017460-001/U – 24/120/230 Vac Internal Transformers for Series 2
Motors
50017460-003/U – 120 Vac Internal Transformers for Series 2 Motors
Q7130A1006/U – Interface Module (4-7, 6-9 or 10.5-13.5 Vdc Control)
Q7230A1005/U – Interface Module (4-20 mA or 2-10 Vdc Control)
Q7330A1004/U – Interface Module (W936 or W945 Control)
Material
Number
Torque
Rating
(lb-in.)
Torque
Rating
(Nm)
Power
Consumption
Timing,
Nominal
Internal
Auxiliary
Switch
Factory
Stroke
Setting
Shaft Rotation
(upon control
signal increase)
Electrical
Connections
Internal
Transformer
Weight Includes Supply
Voltage
Tradeline
Value
Stroke
M9164A1005/U 35 lb-in. 4 Nm Driving –
10 VA
30 - 60 sec 0 90 degrees Clockwise (as
viewed from
power end)
(normally
closed)
Quick-
connect
terminals
50004263-
003
7.5 lb Transformer 120V Adjustable; 90
to 160 degrees,
Asymmetrical
M9164A1013/U 35 lb-in. 4 Nm Driving –
10 VA
30 - 60 sec 0 160 degrees Clockwise (as
viewed from
power end)
(normally
closed)
Quick-
connect
terminals
50004263-
001
7.5 lb Transformer 24V;
120V;
230V
Adjustable; 90
to 160 degrees,
Asymmetrical
M9164A1070/U 35 lb-in. 4 Nm Driving –
10 VA
30 - 60 sec 0 160 degrees Clockwise (as
viewed from
power end)
(normally
closed)
Quick-
connect
terminals
None 6.5 lb 24V Adjustable; 90
to 160 degrees,
Asymmetrical
M9164C1001/U 35 lb-in. 4 Nm Driving –
10 VA
30 - 60 sec 2 160 degrees Clockwise (as
viewed from
power end)
(normally
closed)
Quick-
connect
terminals
None 6.5 lb 24V Adjustable; 90
to 160 degrees,
Asymmetrical
M9164C1068/U 35 lb-in. 4 Nm Driving –
10 VA
30 - 60 sec 2 90 degrees Clockwise (as
viewed from
power end)
(normally
closed)
Quick-
connect
terminals
50004263-
003
7.5 lb Transformer 120V Adjustable; 90
to 160 degrees,
Asymmetrical
M9164D1009/U 35 lb-in. 4 Nm Driving –
10 VA
30 - 60 sec 0 160 degrees Counter-
clockwise (as
viewed from
power end)
(normally open)
Quick-
connect
terminals
None 6.5 lb 24V Tradeline Adjustable; 90
to 160 degrees,
Asymmetrical
M9174B1027/U 75 lb-in. 8.5 Nm Driving –
12 VA
30 - 60 sec 1 90 degrees Clockwise (as
viewed from
power end)
(normally
closed)
Quick-
connect
terminals
50004263-
003
7.5 lb Transformer 120V Adjustable; 90
to 160 degrees,
Asymmetrical