Datasheet

Sensing and Internet of Things 5
MICRO SWITCH Heavy-Duty Limit Switch, Stainless Steel (LS2 Series)
SIDE ROTARY: Available levers provide greater versatility.
Actuating heads can be indexed in any of four positions, 90°
increments. All are momentary action except maintained head
(LS2N Series).
LS2A - Standard: 15° maximum
pretravel, 5° (single-pole) and 7°
(double-pole) maximum differential
travel, 60° minimum overtravel.
LS2N - Maintained contact: Maintained on
counterclockwise rotation and reset on clockwise rotation,
and vice versa.
LS2H - Low torque, low differential travel: Features low
operating torque and narrow differential travel. 68° minimum
overtravel.
LS2L - Sequence action: Delayed action between operation
of two poles. 48° minimum overtravel.
LS2M - Center neutral: One pole operates on the clockwise
rotation, and the other pole on the counterclockwise rotation.
53° minimum overtravel.
TOP PLUNGERS: Available with 4,83 mm [0.19 in] minimum
overtravel. Top plungers are offered in pin plunger and a roller
plunger.
LS2C - Top pin plunger: A stainless steel
plunger for in-line actuating motion.
A boot seal on the plunger and a seal
between the actuator head and housing.
Momentary action.
LS2D - Top roller plunger: A stainless
steel roller and plunger that is adjustable
to 90° angles to accept cam or slide
operation from any of two directions.
Boot seal on the plunger and a seal
between the actuator head and housing.
Momentary action.
MICRO SWITCH HDLS STAINLESS STEEL LS2 SERIES ACTUATOR HEADS
SIDE PLUNGERS: Available with 4,83 mm [0.19 in] minimum
overtravel. Side plungers are offered in a pin plunger and a
roller plunger.
LS2E - Side pin plunger: A stainless steel
plunger for actuating motion inline with
the plunger travel. Actuating head may
be indexed in any of four positions, 90°
apart. A boot seal on the plunger and a seal
between the head and housing. Momentary
action.
LS2F - Side roller plunger: With a
stainless steel roller pluger, this switch
fits in close quarters under cams and
slides. The head may be indexed in any of
four positions, 90° apart. The roller can
be turned vertical or horizontal to the
switch. Seals are same as side pin plunger.
Momentary action.