Quick Start Guide

Install the battery before using the reader for the first time.
1. To access the battery compartment, remove the battery cover
screws and then the battery cover.
2. Insert the battery into the battery compartment with the tape at
the bottom.
3. Attach the battery cover and tighten the screws. Note that the
torque should be 3.5kg.f.
Battery Installation and Remove
2
1
To uninstall the battery, remove the battery cover screws and
then the battery cover. Pull the tape on the battery to pull the
battery out.
Tape
MODE
2
1
3.8V 4000 mAh
Tape