User Manual

10 11
EFY-045, EFY-047 SERIES, HY-047. HY-048 AND HY-049 SERIES REMOTE CONTROL OPERATION (CONT’D)
Flashlight Feature:
Note: Only one bulb will activate when using the flashlight feature. The Remote Control
has only one light. The second bulb is the Remote Transmitter.
Press and hold the Flashlight button (
) located on the back of the remote control to
activate the Flashlight.
Remote Control Storage
The remote control may be stored in the recessed area located behind the bezel
controls when it is not in use.
USER SERVICING INSTRUCTIONS EFY-041, HY-041, EFY-047, HY-047, HY-048 AND HY-049
A. CLEANING THE FILTER
Note: The filter feature is only available on the EFY-041 Series, EFY-047 Series,
HY-041 Series, HY-047 Series, and HY-048 Series. The EFY-045 Series does not have
this feature.
The filter is located behind the rear grille of the fan. To clean the filter:
• Be sure the fan is turned off and the power cord in unplugged
from the outlet.
• Gently unsnap the rear grille from the fan (Fig. 18) and remove
the filter.
• Run the filter under cool water to remove the accumulation
of particles.
• Once filter has been cleaned let it dry completely before placing
back in fan. Do not wring, bend or pull on the filter as this may
cause damage.
• Once the filter is completely dry, replace the filter and firmly snap rear
grille cover back in place.
B. CLEANING THE FAN
• Ensure the fan is turned off and unplugged.
• Use only a soft cloth to gently wipe the outer surfaces
of the fan clean.
• To clean between the grilles and fan blade area, we recommend
using a pipe cleaner, flexible dustwand, vacuum cleaner or
compressed air to gently remove the dust.
• To clean the rear grille use a soft dry cloth. Once the rear grille
is clean replace filter and rear grille before operating. (Fig. 19)
This fan is equipped with a safety “OFF” switch to prevent the fan from operating if
the rear grille is removed or not properly assembled.
• DO NOT immerse the fan in water and never allow water to drip into
the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• For storage, you may leave the fan assembled and covered to protect it
from dust. Store the fan in a cool, dry place.
Fig. 18
Fig. 19
Filter
Grille
EFY-045 SERIES, HY-047, HY-048 AND HY-049 SERIES REMOTE CONTROL OPERATION
Power and Fan Speed Mode
A. Press the Power button (
) once: Fan will
activate and run on High speed (
)
B. Press the Power button twice:
Fan will change to Medium speed (
)
C. Press the Power button a third time:
Fan will run at Low speed (
)
D. Press the Power button a fourth time:
Fan will turn off
Note: The fan will run continuously on high speed when initially activated. The
temperature displayed will be the current ambient temperature.
Up and Down Buttons
When the fan is operating in Temperature or Timer Mode, press the Up or Down
buttons (
) on the remote control to change the temperature or timer settings.
Note: The Temperature and Timer, or the combined Temperature/Timer mode cannot be
entered by using the remote control.
Oscillation and Ionizer Mode
NOTE: The HY-049 does NOT include the Ionizer Feature
The fan may be operated in Oscillation or Ionizer mode independently or may be
operated using both features simultaneously.
A. Press the Oscillation/Ionization button (
) once to activate oscillation
B. Press the Oscillation/Ionization button twice to activate ionization in addition to
oscillation
C. Press the Oscillation/Ionization button a third time to operate the ionizer and turn
the oscillation off
D. Press the Oscillation/Ionization button a fourth time to turn the ionizer off.
Note: The Ionizer is activated when the green light on the receiver is on.
Breeze Mode
A. Press the Breeze Mode button (
) once to operate Breeze Mode in the low breeze
setting (
). The low breeze mode operates in accordance with the chosen speed
setting of the fan as follows:
• High Fan Speed: Breeze Mode will alternate between the high and medium speed
settings
• Medium Fan Speed: Breeze Mode will alternate between the medium and low
speed settings
• Low Fan Speed: Breeze Mode will alternate between low and off setting
B. Press the Breeze Mode button a second time to operate the fan in high Breeze
setting (
). This will operate the fan in a random high/medium/low pattern regardless
of the speed setting.
C. Press the Breeze Mode button a third time to turn the Breeze Mode off.
Press to turn fan
on or off and set speeds
Press to set
temperature degrees
and/or timer hours
Press to activate
breeze modes
Press to activate
oscillation and/or ionizer