HX2 Wearable Computer With Microsoft Windows® CE 5.
HX2 Rugged Wearable Computer Components - Front
Components - Back Armband Assembly
Assemble Armband and Secure On Arm Attach Battery Cable to HX2
Trigger Rotation Attach Ring to Finger
Attach Ring Cable to HX2 Attach HX2 to Armband
Final Assembly Removing HX2 from Armband
Proper Scanning Technique Connecting Battery and Audio Cable
Attaching Headset to HX2
Hip Flip
Desktop Cradle Battery Multi-Charger
Remove Ring Strap Module Replace Ring Strap Module Remove Trigger Module Replace Trigger Module
Setting up the HX2 Please have the following Information available before setting up your HX2: l Network ID (SSID) of the Access Point l WEP key or LEAP authentication credentials 1. Connect a fully charged battery to the HX2. 2. Press the Power button. 3. Accept the EULA. 4. Calibrate the touch screen. 5. Set the date and time. 6. Edit the radio parameters. 7. Edit the RFTerm Terminal Emulation parameters (optional). 8. Perform a reboot.
1. Connect the HX2 end of the cable to the connector on the bottom of the HX2. 2. Connect the USB type A connector on the I/O cable to a USB port on a PC or laptop. ActiveSync starts automatically when the USB cable is connected. When the HX2 loses connection (e.g., enters Suspend Mode), the connection to ActiveSync is lost. When the HX2 resumes, disconnect the PC end of the cable and reconnect. Please refer to the HX2 Reference Guide for ActiveSync information.
Please refer to the Radio Mode parameter in the HX2 Reference Guide. It is important that this parameter setting corresponds to the Access Point to which the HX2 connects. Setting Up AppLock HX2 devices are shipped to boot in Administration mode. In this mode, the user has full access to the device and no password is needed. After the administrator completes the process below, the HX2 switches to end-user mode and restricts access to only the specified application(s). 1.
7. Select Session > Connect from the application menu or tap the Connect button on the Tool Bar. 8. Upon a successful connection, the host application screen is displayed. To change options (e.g., Display, Colors, Cursor, Barcode), please refer to the RFTerm Reference Guide for descriptions of these and other features. Disclaimer Honeywell International Inc.
