Use and Care Manual

US AP 2016/09/19

PERFORMANCE DATA SHEET

Do not use with water that is unsafe or of unknown quality without adequate disinfection

before or after the system.

While testing was performed under laboratory conditions, actual performance may vary.

Inﬂuent Challenge Concentration of 1.0 x 10 CFU/ML - 1.5 x 10 CFU/ML, actual

levels remained the same within a variation from -9.57% to 2.82%

Influent Challenge

Native bacteria in water +/-20%

Challenge requirement*

This system has been tested according to NSF/ANSI 42 for bacteriostasis.The

concentration of the indicated substances in water entering the system was unchanged

under the permissible limits for water leaving the system, as speciﬁed in NSF/ANSI

42.