User manual

12 - 12
Good Read Delay *No Delay DLYGRD0 4-5
Short Delay (500 ms) DLYGRD500 4-5
Medium Delay (1000 ms) DLYGRD1000 4-5
Long Delay (1500 ms) DLYGRD1500 4-6
User-Specified Good Read Delay Range 0 - 30,000 ms DLYGRD##### 4-6
Manual Trigger Modes *Manual Trigger - Normal PAPHHF 4-6
Manual Trigger - Enhanced (not
supported by Granit 1980i and
1981i)
PAPHHS 4-6
Serial Trigger Mode Read Time-Out
(0 - 300,000 ms) *30,000
TRGSTO#### 4-6
Presentation Mode Presentation Mode PAPTPR 4-7
Presentation LED Behavior After
Decode
*LEDs On TRGPCK1 4-7
LEDs Off TRGPCK0 4-7
Presentation Sensitivity (not
supported by Granit 1980i and
1981i)
Range 0-20 (*1) TRGPMS## 4-7
Presentation Centering Window Presentation Centering On PDCWIN1 4-8
*Presentation Centering Off PDCWIN0 4-8
Left of Presentation Centering
Window (*40%)
PDCLFT### 4-8
Right of Presentation Centering
Window (*60%)
PDCRGT### 4-9
Top of Presentation Centering
Window (*40%)
PDCTOP### 4-8
Bottom of Presentation Centering
Window (*60%)
PDCBOT### 4-8
In-Stand Sensor Mode Sensor On TRGSSW1 4-9
Sensor Off TRGSSW0 4-9
Poor Quality Codes Poor Quality 1D Reading On DECLDI1 4-9
*Poor Quality 1D Reading Off DECLDI0 4-9
Poor Quality PDF Reading On PDFXPR1 4-10
*Poor Quality PDF Reading Off PDFXPR0 4-10
CodeGate *CodeGate Off Out-of-Stand AOSCGD0. 4-10
CodeGate On Out-of-Stand AOSCGD1. 4-10
Streaming Presentation Streaming Presentation Mode -
Normal
PAPSPN 4-10
Streaming Presentation Mode -
Enhanced (not supported by
Granit 1980i and 1981i)
PAPSPE 4-10
Mobile Phone Read Mode (not
supported by Granit 1980i and
1981i)
Hand Held Scanning - Mobile
Phone
PAPHHC 4-11
Streaming Presentation - Mobile
Phone
PAPSPC 4-11
Hands Free Time-Out Range 0 - 300,000 ms TRGPTO###### 4-11
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page