User manual

5 - 2
Very Low Beeper (Nighttime Mode)
The following bar code silences the base, and sets the scanner for a very low beep when reading bar codes. After scan-
ning this code, the base beep, base and scanner power up beep, and scanner linking sounds are all silenced. When a bar
code is scanned, the scanner emits a very soft beep.
Low Beeper (Daytime Mode)
The following bar code sets all sounds to on, but at a low volume. The scanner beep, base beep, base and scanner power
up beep, and scanner linking sounds are all set to low volume.
To reset your scanner and base to default sounds, refer to Resetting the Custom Defaults (page 12-3).
Page Button and Presentation Modes
Note: The following settings are not supported by the Xenon 1900h scanner.
Nighttime Mode -
Cordless Scanner and Base
Nighttime Mode -
Corded Scanner
Daytime Mode -
Cordless Scanner and Base
Daytime Mode -
Corded Scanner