User manual

2 - 1

Installing Remote MasterMind for Scanning

Overview

Remote MasterMind for Scanning (ReM) must first be installed on a server and then on each client (reg-

ister or terminal connected to a scanner). The ReM installer is a universal installer that you can use to

install both the web browser-based interface on your server and the ReM client agent (MBean) on each

scanner’s host.

System Requirements

The following requirements must be met before ReM is installed.

Server

•Microsoft

Windows

Server 2008 (32 bit)

•Java

™

5.x or 6.x (Java Runtime Environment 1.5 or 1.6)

• Apache Tomcat 6.0

• Minimum 1GHz processor and 1GB of RAM

Note: Contact your local Honeywell representative for additional supported operating systems.

Client

• Java 5.x or 6.x (JRE1.5 or 1.6)

• Microsoft Windows XP Professional SP2/SP3, POSReady 2009 SP3, or Microsoft Windows

Embedded for Point of Service version 1.0 (other WEPOS versions may be supported)

• Minimum 512MB RAM

Note: WEPOS 1.0 is also known as Microsoft Windows XP version 5.1.2600.

Server/Remote Computer

Internet Explorer 8 is the preferred browser for ReM’s web interface.

Installation Package

Honeywell offers Remote MasterMind with two distribution methods: you can purchase a CD or down-

load the installation files from the ReM FTP site. In addition to the setup files for ReM, both packages

include firmware files for legacy Metrologic scanners. You can download firmware for legacy Hand Held

Products and other Honeywell devices at www.honeywellaidc.com.

Note: ReM installation from a shared folder/drive is not supported. However, ReM installation from a

mapped drive/folder is supported.