User manual

A - 1

Configuration and Test Bar Codes

IS and MS Models

Use the following bar codes for Honeywell scanners with model numbers that begin with MS or IS and

legacy Metrologic devices:

Name Usage Bar Code

Recall Defaults Restores the device to the factory default

settings.

INTERFACE CONFIGURATION

RS232 Configures the device to use the RS232

interface.

IBM OEM USB Configures the device to use the IBM OEM

USB interface (also known as USB Sure-

POS).

USB Serial Configures the device to use the USB

Serial interface (Virtual COM).

REM CONFIGURATION

Enable Test Mode Enables the ReM Test Mode: Broadcasts

are sent every minute and heartbeats

every 10 seconds. Should not be used for

production environments.

Disable Test Mode Disables the ReM Test Mode: Broadcasts

are sent every hour and heartbeats every

minute.

Disable ReM Turns off ReM features in the scanner.

After reading this barcode, the device will

need to be re-licensed to enable ReM

again.

Send a Broadcast Forces the scanner to send a broadcast

message similar to a scheduled one. Used

for testing.

³999998

³415554

³999970

³4164150

³147017

³147007

³999905

³999904