User manual

3 - 32
LicenseFilePath=C:\Program Files\JPOSScanner\ReMLicensingTool\
license.txt
IsUseGoldenSetting=yes
IsFlashCoprocessorMain=yes
IsFlashMainprocessor=yes
IsFlashCoprocessorBoot=no
Note: No_Number is an optional value you can use if you do not have the firmware number.
Creating a Configuration File Manually
You can also create a configuration file manually, using the layout required by the licensing process (see
Basic Layout on page 3-30). Then save the file as C:\Program Files\JPOSScanner\
ReMLicensingTool\RemApnt.config:
Example:
[Rem Licensing]
ScannerName=MS2400
ScannerID=17
FirmwareMain=40175
FirmwareMainPath=./config/StratosS2_40257T.hex
FirmwareCoprocessor=40178
FirmwareCoprocessorPath=./config/40269-40270B.HEX
GoldenSettingPath=./config/setting.mst
LicenseFilePath=./config/license.txt
IsUseGoldenSetting=no
IsFlashCoprocessor=yes
IsBootFlashCoprocessor=yes
IsFlashMainprocessor=yes