User manual

3 - 23
Monitor Page Options
• Click Stop Update to freeze the monitor information so that it does not update according to the
automatic refresh period (see page 3-7).
• Click Save Log to generate a CSV file containing all of the monitor information displayed for the
selected scanners on the current tab. See Appendix C for more information about ReM Reports.
• To save a CSV file containing information for a single scanner:
• Click Broadcast to save a log of a single scanner’s transmissions, containing the following
information: type (broadcast or heartbeat), active license, flash ID, firmware version,
manufacturer, manufacture date, scanner model, PC main board number, scanner ID byte,
software build date, serial number, device class, UPOS level, vendor ID, custom serial number,
decoder type, device agent version, engine serial number, imager type, interface, firmware part
number, scanner docked, base link status, battery voltage, linked base address, logical device
address, scanner name, Bluetooth PIN, base serial number, current device cable type, device
generation, plug-in license status, base firmware revision, base part number, and scanner status.
Note: For scanners that do not broadcast statistics, the Broadcast log contains only heartbeat and basic
broadcast information.
• Click Operations to save a report of operations performed on a scanner. The log contains the
date and time the operation began, the date and time the operation ended, the type of operation
(flash, pull or push), and return code.