User manual

3 - 22
The following table contains common monitoring values. However, the information displayed may differ
depending on the scanner model being monitored. For example, in the previous screen print, the
MS7580 reports Manufacturer’s Name but the IT4600 does not.
Parameter Description
IP Address The location of the scanner on the network.
Scanner Model The specific model number of the scanner.
Serial Number The serial number of the scanner.
Firmware Version The firmware revision number that the scanner uses.
Logical Device Name For model numbers beginning with MS or IS, Logical Name is specified
by the user during installation (see page 2-5). All other scanner models
are automatically assigned a Logical Name of “HHI” followed by the
scanner model number.
Errors reported Code indicating an error condition in the scanner. For example: RAM
Error, Program Error, Configuration Error, Volume Switch Error, Copro-
cessor Interface Error. For descriptions of any error conditions, please
refer to the scanner’s documentation. Not all scanners report scanner
errors.
Decoder Type The type of bar code decoder: 1D, PDF or 2D.
Device Agent Version Version of the device management agent running on the client.
Imager Type The type of imager: Linear, 4000-based, 5000-based, or Megapixel.
Primary Interface How the scanner is attached to its host (e.g., RS232, IBM OEM USB).
Firmware Part Number The manufacturer’s part number for the scanner’s firmware.
Status Whether the scanner is Connected or Disconnected.
HBTS The time stamp of the last heartbeat recorded.
Hours Of Operation The amount of time the scanner has been running since it was
installed.
Device Generation Which generation the device belongs to. For example, most older
scanners are Generation 5, while the Xenon 1900 and 1902 are Gener-
ation 6.
Manufacturer’s Name The name of the manufacturer that made the scanner.
Manufacture Date The date on which the scanner was manufactured.
Scanner ID Byte Value that identifies the scanner type (MS and IS models only).
PC Board Number String containing information about the scanner’s PC board number.
Software Build Date When the firmware was built.
Device class The allowable UPOS device classes support by the scanner: Scanner
and/or Scale (MS2300 and MS2400 only).
UPOS Level The major and minor levels of the supported UPOS level.
Vendor ID The USB Vendor ID.
Flash ID The type of compatible firmware files that can be flashed in this device.
Active License List of active licenses in the scanner (e.g., Total Freedom plug-in).