User manual

3 - 18
3. Click on a specific scanner to display statistics.
The actual statistics reported may differ depending on the scanner model.
The message “NOT RETRIEVED” displays for some statistics under the following circumstances:
• ReM has not yet received the information from the scanner.
• The scanner has been disconnected and the MBean restarted.
• The scanner model does not support that statistic.
The following table explains the statistic results:
Parameter Description
IP Address The location of the scanner on the network.
Scanner Model The specific model of scanner.
Serial Number The serial number of the scanner.
Firmware Number The version of firmware that the scanner is using.
Logical Device Name For model numbers beginning with MS or IS, Logical Name is specified
by the user during installation (see page 2-5). All other scanner models
are automatically assigned a Logical Name of “HHI” followed by the
scanner model number.
Bar code (BC) The contents of the last bar code scanned.
Bar code Type (CT) The type of bar code that was last scanned.