User manual

3 - 17
version, serial number, primary interface, and return code (error). See Appendix C for more information
about ReM Reports.
• To save a copy of the configuration file successfully pulled from a specific scanner, click on the scanner
name to open the detail, then click Save File. (Pull operation only.)
Statistics Page
The Statistics page allows you to review scanner performance and collect performance metrics. ReM
can display statistics from multiple scanners at a time.
The following scanner models provide statistical information: MS1690, MS2300, MS2400, MS4980,
MS5145, MS7120, MS7180, MS7580, MS7820, MS9520, MS9540, and MS9590.
You can move to any tab on the Statistics page to watch different devices. All tabs display information in
parallel. However, the statistics stop updating if you navigate to a different page. If the results on a par-
ticular tab found only models that do not provide statistics, ReM displays the message “No Suitable
Device Found.”
The Monitor/Statistics refresh period set on the Admin Setting page determines how often the Statis-
tics listed are updated (see page 3-7). The default is every 10 seconds.
1. Select the check boxes next to the desired scanners or click Select All.
2. Click Start Update.