User manual

3 - 16
Pull/Push Configuration
1. Select the check boxes next to the desired scanners or click Select All.
Once the operation is complete, ReM displays a list of those scanners configured successfully (Sta-
tus:Success) and another of any that failed (Status: Error).
Note: Appendix B contains a complete list of ReM error codes.
Configure Page Options
• Click on a specific scanner in either the Status:Success or Status:Error list to display detailed
information about the scanner.
• Click Save Report to generate a CSV file containing the following information about the completed
operation on the current tab: push/pull file name, IP address, location, scanner model, firmware
2. Click Pull
Configuration
The message “Pull in
Progress” displays.
The scanner configuration uploads from each of the
selected scanners. ReM copies this information to
“serialnumber-filename.mst” and saves it to the
...\Tomcat 6.0\webapps\ReM\GAConfigFiles direc-
tory on the web server.
or
Click Push
Configuration
The message “Push in
Progress” displays.
ReM downloads the configuration file from the
...\Tomcat 6.0\Remote MasterMind folder on the
web server to each scanner you have selected.