User manual

3 - 14
5. The message “Update in Progress” displays below the Update Firmware button until the update is
complete.
Once the flash is completed, ReM displays a list of those scanners updated successfully (Status: Suc-
cess) and another of any that failed (Status: Error).
Once the operation is complete, ReM removes the check marks next to scanners that have been suc-
cessfully updated. If an operation on any device fails, the check box for that device remains checked.
For example, in the screen above, only the IT4600 scanner on 192.168.1.3 is still selected. It is also
listed at the bottom of the page under Status:Error. The other device is not selected because the firm-
ware was successfully updated during the first attempt.
Update Page Options
• Click on a specific scanner in the status list to display detailed information, such as error code:
Note: Appendix B contains a complete list of ReM error codes, including descriptions. In the example
above, the error occurred because the firmware file extension is invalid for that scanner model.